Projecta IM2000 Instructions d'exploitation télécharger pdf (Page 66)

Interfacing the Additional I/O on Connector P1

The MSEL inputs and Step/Direction outputs on the IM483-34P1-8P2 are

interfaced in the same way as those on the IM483-34P1. See the part of this

appendix pertaining to that model of the IM483 for interface and connection

details.

Optional Screw Terminal Interface for P1

The BB-34-4P is an optional breakout board that plugs directly into the pin

receptacle for P1. This gives the user a screw terminal interface to P1. For

drawings and details please see Appendix D: Accessories, BB-34-4P.

IM483-PLG

The IM483-PLG replaces both

connectors P1 and P2 with an

Altech 8 position pluggable inter-

face. The removeable, plug-in screw

terminal set is available as an option

(PLG-R).

This connector option is useful in

system designs where ease of

removal is desired. For example, the

IM483-PLG is pin compatible with

the IM804/5-PLG. If more power is

needed the drives are easily swapped.

These connectors are oriented to prevent plugging the driver in backwards.

When the mating connectors are plugged in, they will lock in place.

See Figure A.12 for pin locations and orientation.

Applicable Products:

IM483-PLG

PLG Connectors - P1 & P2

8X 0.040 (1.02)

Sq. Post

Tin Plated Bronze

0.200

(5.08)

0.472

(11.99)

0.412

(10.46)

Figure A.11: IM483-PLG Connectors

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 76 77

Pas de commentaire

Projecta IM2000 Instructions d'exploitation Page 66