Projecta IM2000 Instructions d'exploitation télécharger pdf (Page 15)

Section 3

Mounting The IM483

This section has recommended mounting instructions for the standard IM483.

Special mounting instructions for any of the connection options for the IM483

are available in Appendix A: Standard Connection Options, of this document. An

optional heat sink and thermal pad, the H-4X and TN-48, are available for the

IM483. See Appendix C: Cooling Solutions, for details.

Thermal Pad

TN-48 or E

uivalent

Mounting Plate

or Heat Sink Surface

4 X #6

(

)

Threaded

Holes. (See Mechanical,

Figure 2.1 for Hole Pattern

Dimensions)

#6 X 5/8 Stainless

Machine Screw

#6 Split Lock Washer,

Stainless (.04TH, .24 OD)

U.S. (4 ea.)

M3 X 0.5 Stainless

Machine Screw

M3 Split Lock Washer,

Stainless

(

.08TH , .6.20 O D

)

Metric (4 ea.)

The tor

ue s

ecification

for the mounting screws

is 5.0 to 7.0 lb-in

(

0.60 to

0.80 N-m). Do not over-

tighten screws!

Figure 3.1: Mounting Recommendations

NOTE! This diagram focuses on the standard IM483. The

IM483-8P2 and IM483-34P1-8P2 feature connector pins which

may be soldered directly into a user’s PCB design. Mounting

details and a PCB hole pattern may be found in

Appendix A:

Standard Connection Options.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 76 77

Commentaires sur ces manuels

Pas de commentaire

Projecta IM2000 Instructions d'exploitation Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Adaptateurs et onduleurs de puissance Projecta IM2000